led light strip manufacturers tell you how to choose the light strip?

In this modern smart home life, many people do not meet the single main lamp decoration style, but also install some lights to increase the comfort and warmth of the room, the lamp belt installation is convenient, can be flexibly used in a variety of Spaces, to create a different style of home environment. So how should the LED light belt choose? Come, and led light belt manufacturers today to understand it.

 

First, LED lights with chips

 

LED is a device for stable current work, so a major culprit of the conventional high-voltage lamp belt caused by burning lamp bead is the lack of constant current control module, so that the LED work in the valley type of fluctuating voltage, the instability of the mains will further aggravate the LED burden, which leads to the conventional high-voltage lamp belt prone to dead lights and other failures. Therefore, a good lamp belt must have a good chip stable current.

 

Two, LED lamp bead wattage

 

If the number of LED beads in a unit is the same, it can also be judged according to the level of the wattage, and the high wattage is brighter.

 

Third, the length of the lamp belt

 

The lamp belt has a number of units, which need to be purchased in accordance with the entire multiple of the number of units, and most of the units of the lamp belt are 0.5m and 1m. What if the number of meters required is not a multiple of the number of units? Buy a light belt with strong cutting ability, such as each 5.5cm can be cut, which can better control the length of the light belt.

 

Four, the lamp with light color

 

What color light the lamp hair naturally is the first to consider.

 

The light color of the light belt is mainly determined according to the decoration style and tone of their own, and 3000K warm light and 4000K neutral light are commonly used in the home, and the light color is comfortable and the light effect is warm.

 

Five, the brightness of the lamp belt

 

The brightness of the strip depends on two points:

 

1, the number of LED lights in a unit

 

The more LED beads in the same unit, the higher the brightness. In order to avoid the uneven light caused by the uneven surface of the lamp belt, that is, we often say that “particle light”, “wave light”, the more dense the lamp bead particles, the more uniform the relative light.

 

2, the light should be uniform

 

The brightness between the lamp beads and the lamp beads should be consistent, which is related to the quality of the LED lamp beads. Usually we quickly judge the method: with the eyes! At night, observe the brightness of the light belt and observe the brightness effect of the variable light rhythm lamp.

 

The brightness of the lamp belt should be consistent, which is related to the pressure drop of the LED lamp belt. LED light belt needs to use power drive light, the current carrying wire of the light belt is not enough, this situation will occur, it is recommended that the whole light belt does not exceed 50m in actual use.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Advisory Message

Message consultation

Play Video